D-Shaft GA12-N20 Low RPM / N20 DC Geared Motor D-Shaft Low RPM / Metal Body (Buy 4 & Get Free DC Motor)

Specification

• D-Shaft High Quality
• Low 100 RPM
• GA12-N20 Gear Motor
• Metal Body
• Voltage : 3V to 9V
• Shaft : D-shaped Shaft
• Size : 36 x 11 x 10 (mm)

Description

The GA12-N20 Gear Motor is a specific type of geared motor with a GA12 motor and an N20 gearbox. Here is a description of the GA12-N20 Gear Motor:

1. Motor Type: The motor used in the GA12-N20 Gear Motor is a GA12 motor. The GA12 motor is a small-sized brushed DC motor known for its compact design and low power consumption.

2. Gearbox Type: The GA12-N20 Gear Motor is equipped with an N20 gearbox. The N20 gearbox is a type of planetary gearbox that provides torque multiplication and speed reduction. It typically consists of a set of gears arranged in a planetary configuration.

3. Voltage: The GA12-N20 Gear Motor is available in different voltage options, usually ranging from 3V to 12V. The specific voltage will depend on the variant or model of the motor.

4. Speed: The speed of the GA12-N20 Gear Motor can vary depending on the specific gearing ratio of the N20 gearbox. Typically, the speed ranges from around 100 to 300 RPM (Rotations Per Minute).

5. Torque: The GA12-N20 Gear Motor is designed to provide increased torque output due to the inclusion of the N20 gearbox. The torque can range from a few dozen to a few hundred grams per centimeter, depending on the specific model and gearing ratio.

6. Dimensions: The GA12-N20 Gear Motor is relatively compact and typically has a diameter of around 12mm for the GA12 motor and a length of approximately 25mm to 30mm, including the gearbox.

It’s important to note that the exact specifications of the GA12-N20 Gear Motor may vary between different manufacturers or suppliers. Therefore, it’s recommended to refer to the specific datasheet or product information provided by the manufacturer to obtain accurate and detailed specifications for a particular GA12-N20 Gear Motor.