Arduino UNO Cable

Specification

• Connector Type: USB connector type is Type-B
• Cable Length: 1.5 Feet
• Data Transfer Rate: 480 Mbps
• Compatibility: Arduino UNO 

Description

The Arduino UNO board uses a USB Type-B cable for communication and programming with a computer. Here are some technical specifications of the cable: 1. Connector Type: The USB connector type is Type-B, which is a square-shaped connector with beveled corners and two small tabs on the top and bottom of the connector. 2. Cable Length: The standard length of the cable is 1 meter or 3.28 feet. However, there are other lengths available, such as 50 cm, 2 meters, or 6 feet. 3. Data Transfer Rate: The USB 2.0 standard is used for communication and programming with a computer. The data transfer rate can reach up to 480 Mbps (megabits per second). 4. Cable Construction: The cable consists of four wires: two for power (VCC and GND) and two for data (D+ and D-). The wires are typically wrapped in a shielded cable to reduce electromagnetic interference. 5. Connector Material: The connectors on each end of the cable are typically made of molded plastic, with gold-plated contacts for reliable signal transmission. 6. Compatibility: The cable is compatible with any USB Type-A port on a computer or USB hub. It is also compatible with other Arduino boards that use a USB Type-B connector, such as the Arduino Mega 2560 or Arduino Due. These specifications can help you choose the right cable for your Arduino UNO board and ensure reliable communication and programming with a computer.